This flue system only has a "male" end and no "female" end this flue pipe. The "male end must be installed facing downwards.

Due to only having one tappered end this pipe can be easily cut and still used within a system, with the "male" end from the second piece going inside the cut end of the first piece.

Features:

° 1.2mm Vitreous Enamelled Matt Black Flue Pipe,
° This flue pipe has been enamelled on both the inside and the outsdie of the pipe to solve problems linked with coating,
° Colour resistance and stability even at very high tempretures,
° Classified as class T600 (the highest standard accoring to EN1856-2),
° Scratch Resistant,
° Can be cleaned with any solvent or cleaning product, which is very important, espically in the event of of a leakage.
° The internal enamelling guarantees resistance to corrosion and, therfore a much longer lifetime.
° Cutting can be done without chipping the enamel if the correct tools are used, such as a disk grinding wheel with thin discs of approx 1.2mm,


Important:
Condensation is quite common occurance due both to the type of stove on which they are installed (with low temperature smoke) and for thermal inertia of the pipes themselves. These flue pipes are classifed as W, and consequently, they can be installed even in the presence of condensate, with the "male" end facing downwards. A "female" - "female" fitting may be required (sold seperatly).