Central Heating Boiler Stoves

A stove with a backboiler can be used to supplement your existing heating system or to entirely run your heating and hot water. As a rough rule of thumb domestic hot water generally takes 2.3-3kW (8-10,000 BTU), whilst an average radiator (3' x 4') takes around 1.5kW (5,000 BTU). This rule of thumb is no substitute for the advice of a good plumber / heating engineer.

Stainless steel backboilers tend to cost a little more than steel backboilers, but will last longer. Glass lined backboilers (like Franco Belge stoves have) will tend to last longer than steel only backboilers.

Clip-in backboilers can be added to the stove at a later date and so are available seperately, but have a lower heat output than integral, factory fitted stove backboilers.

Integral backboilers are factory fitted and have a high heat output. Generally a stove with an integral backboiler will have a fairly low (1-5kW) output to the room and a high output to the boiler.

        
        $('#slideshow5').cycle({ 
          

          fx: 'fade'
                      ,

            timeout: 10000
                              

        });