Clay Liner Chimney Adaptor

Clay Liner Chimney Adaptors

Our Clay Liner Chimney Adaptors are designed to make a tar tight connection into an existing clay/concrete or terracotta chimney. The top spigot inserts inside of the existing circular liner, the shoulder section of the adaptor then pushes up to meet the bottom of the liner. Any tar that gets outside of the spigot is directed back into the flue system via the shoulder. The clay liner chimney adaptor is often held up by the connecting single wall flue pipe (typically vitreous enamel or stainless steel) but two fixing arms come attached to the adaptor for extra stability. Firecement should be used on the joint into the single wall flue pipe (sold separately).

Use the drop down menus above to tell us what diameter clay liner you have, and what diameter single wall flue you need to connect into. Most clay liners are either 180mm (7”), 205mm (8”), or 225mm (9”) these sizes are available off the shelf. We also can offer a made to measure service for unusual sized chimneys, please contact a member of the sales team for more information.

Customer Reviews