Filter Products

Filter Products

Clear Filters

Our Glass Hearth Plates Range...

Glass hearth plates are a very popular choice for our customers. This is due to the fact that if a stove projects a hearth temperature of less than 100°C, a 12mm thick glass hearth can be placed on top of a combustible material such as a wooden floor. This has opened up the installation possibilities, plus let's not forget that a glass floor plate looks fantastic with a stove burning atop it. Available in a wide range of shapes and sizes, we also offer a range of thinner glass floor plates for use with non-combustible materials.

There are different shapes and sizes available depending upon where you intend to place the floor plate - into a corner or against a flat wall. Typically 20mm thick natural stone floor plates and resin are ideally suited for use with contemporary stoves and fires that have a raised firebox and project a hearth temperature of less than 100°C.

The recent proliferation of new materials available for hearths and has redefined what a hearth means. A typical constructional hearth needs to be 225mm total thickness including a concrete base and decorative top. With the introduction of the 100°C regulation a new definition of hearth was introduced, the superficial hearth. This maintains that stoves projecting a hearth temperature of less than 100°C can be placed onto a combustible floor with a non-combustible material between them with a minimum thickness of 12mm, effectively setting the stove free from the fireplace and allowing you to place it almost anywhere in a room provided it projects less than 100°C downwards, and a 12mm superficial hearth exists between the stove and a combustible floor.

If you have a stone or tiled floor down where you plan to place your stove then technically you already have a non-combustible material beneath the stove, thus negating the need for a full on construction hearth. However, building regulations also state that a hearth should be a clear demarcation of the heating area around a fireplace, fire or stove and so simply placing on top of this would not conform. Instead a way around this would be to use a stone floor plate. At around thicknesses as low as 6mm thick these plates a clean visual guide to the hearth area, and clearly denotes a visual demarcation of the fireplace, stove heating area in compliance with regulations.

In terms of bespoke sizing, we know no two homes are alike and with the ability to mix-and-match products, you will often need something cut to size to suit your requirements. We have the ability to cut, shape and polish a variety of different materials to suit your needs, speak to a member of our sales team for further help and assistance with our bespoke service or if you require any additional assistance with one of our fireplaces.

Fireplace Products are proud to present one of the UK's most comprehensive ranges of fireplace hearths and tiles. If the selection is too broad for your needs, try using our filters to narrow your search criteria at the side of this page, so you can find the fireplace product that’s right for you.

    Our Promise

    We believe in the very best customer service and satisfaction...

  • Expert product knowledge & advice
  • Best customer service in our industry
  • More choice than our competitors
  • Competitive prices & price matching
  • High quality products & services
  • Simple & easy buying process

Read what other customers think about our and services.

"Very pleased with your personable service there at Fireplace Products"

"We were extremely pleased with the prompt way the order was dealt with, the polite friendly manner over the telephone and the speed of delivery."

"When I rung up to order the stove, I was also given lots of help and advice and everything was very efficient."

back to top