Seldek Roof Flashings are designed for use with tiled roofs. Available in sizes to suit our range of 180mm and 200mm diameter twinwall flues (7" and 8"). Simply cut the EDPM flashing to the correct pre-marked band to ensure a tight fit and use silicone to ensure it is a water tight joint. The flashing is known as a one part flashing and does not require a secondary storm collar to sit around the flue once it has passed through the flashing. The 99.9% pure grade lightweight flexible aluminium can be easily manoeuvred to fit in with existing tiled/slate roofs. The aluminium base is also the best alternative to avoid heavy-metal contamination of water resources, which can occur from lead flashings.
Deks aims to meet the needs of roofers, builders and heating engineers worldwide with their quality products and years of experiences. Their wide selection of flashing for a multiple scenarios for chimneys, solar and electric works are suitable for both high and low temperatures. Deks flashing is the first choice when looking to protecting your exterior.